CANOGA PERKINS 9145EMP Network Interface Device Hardware - Manual (Page 32)

9145EMP Network Interface Device Hardware User’s Manual Installation
Mounting Options
20
Mounting One 9145EMP in a 19" or 23" Rack - To rack mount one 9145EMP, perform the
following steps:
1. Install the 19" Single Unit or 23" Single Unit Rack Mount Bracket Kit. The Rack Mount Kit
includes two mounting brackets, and the screws required to attach the brackets to the
9145EMP. The brackets attach to the two threaded holes on each side of the 9145EMP,
toward the front (Figure 3-3) using the flat head screws provided. Torque the flat head
screws to 14.5 – 15.5 in-lb.
Figure 3-3 Install Rack Mount Kit
2. Place unit with brackets attached in place on the mounting rack.
3. Install two screws through each bracket into the threaded holes on the mounting rack
(Figure 3-4). Torque the screws to the rack manufacturer’s specifications.
Figure 3-4 Mounting 9145EMP on Rack