CANOGA PERKINS 9145EMP Network Interface Device Hardware - Manual (Page 27)

Functional Description 9145EMP Network Interface Device Hardware User’s Manual
LED Indicators
15
Table 2-6 Network Port LED Indicators
LED Name State Condition
Speed
(SPD)
Off
Port Disabled
Autonegotiate
Green 1000 Mbps
Amber
100 Mbps
System Test
Slow Blinking Green* Port Enabled But No Link
Red Remote Fault
Blinking Red Invalid/unsupported SFP installed
Off
No link
Activity
(ACT)
No transmit or receive activity
Port disabled
Green Link up with full duplex
Blinking Green Transmit or receive activity in full duplex
Amber
System test
Link up with half duplex
Blinking Amber Transmit or receive activity in half duplex
Blinking Red
Link down but transmitting OAM packets in unidirectional
mode
* Slow blinking green means the LED toggles between Off and Green approximately once per sec-
ond.