Leica Geosystems Leica DISTO plus - Manual - Manual (Page 4)

3 How to Use the Instrument Leica DISTO™ plus 1.0.0 GB
de
GB
fr
it
es
nl
ja
How to Use the Instrument
Inserting / replacing the batteries
1 Depress the locking clip and slide end piece to the right.
D5-Z3
2 Remove battery cover. Replace batteries.
Appears on the display if battery voltage is too
low.
For type of battery, refer to Technical Data.
)
Fit batteries the right way round.
)
Use only Alkaline batteries.
3 Push in end piece and listen for locking click sound.
1 st Function level
Leica DISTO™ plus switching ON/OFF
Briefly press.
The illumination, Battery and Beep symbols are displayed
until the first key press.
The instrument can be switched off from any menu point.
)
The instrument switches off automatically after
90 seconds if no key is pressed.
)
An unwanted switching off of the
BLUETOOTH ® -dataconnection is blocked by special
precautions. Please refer to page 11.
Clear key
The clear key may be pressed before or after a
measurement/ calculation.
In Menu Mode it resets to Normal Mode.
During a function (area, volume or Pythagoras) the single
measurements can be deleted step by step and
remeasured.
In the menu settings, the program is terminated if the
Equal (=) and Enter keys are not pressed.
Illumination
Press briefly.
Illumination is switched ON/OFF with a key press.
)
Illumination switches off after 30 seconds if no
key is pressed.
Reference setting
Press until desired reference setting appears.