Leica Geosystems Leica DISTO plus - Manual - Manual (Page 5)

4 1st Function level Leica DISTO™ plus 1.0.0 GB
de
GB
fr
it
es
nl
ja
Possible settings
D5-Z4
front tripod rear
)
At the back of the instrument is a 1/4" camera
thread for the tripod.
)
Settings remain valid until the reference level is
changed or the instrument is automatically or manually
switched off.
)
Basic setting: rear reference
Measuring
Distance measurement
Press and the laser is switched on, the
instrument is in "Pointing Mode".
A second press starts the distance
measurement.
The result is displayed immediately in the selected unit.
)
With the instrument on and the laser off, it is in
"Normal Mode".
)
With the laser on, it is in "Pointing Mode".
Measuring from flat planes
D5-Z5
)
For stable measuring turn endpiece 90°.
Measuring from corners
D5-Z6
Continuous measurement (Tracking)
Press until
appears on the display.
Continuous measurement is started and the
result is displayed.
Press to end Tracking Mode. Last result is
shown in the display.
Example: Stake off distance
D5-Z7
Laser in continous operation
Press until a long "beep" is heard. Now the laser
is activated permanently.
A distance measurement is triggered each time
the key is pressed.
Press to end continuous laser operation.