Compaq 326817-003 - Manual (Page 20)

2-2 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: c-ch2 Installation.doc Last Saved On: 2/15/00 10:55 AM
■ Compaq SmartStart and Support Software CD
■ Configuring the AutoLoader
The default hardware settings are set for a Compaq system (see Figure 2-1).
The settings in the DAT AutoLoader can be changed if required by a particular
system.
Figure 2-1. Autoloader jumper pins
Table 2-1
Hardware Settings
Jumper Description Default
1 SCSI ID Bit 0 OFF
2
SCSI ID Bit 1 ON
3 SCSI ID Bit 2 ON
4
Reserved OFF
5
Reserved OFF
6 Parity Enable ON
Note: The default SCSI ID is set to 6. For other settings see, Table 2-2