Compaq 326817-003 - Manual (Page 24)

2-6 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: c-ch2 Installation.doc Last Saved On: 1/25/00 10:01 AM
Preparing the Computer
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Be
sure you are properly grounded before beginning this procedure. See Appendix B,
“Electrostatic Discharge” for further information.
To prepare the computer:
1. Perform a normal system shutdown.
2. Turn OFF the computer and all peripheral devices.
3. Disconnect the AC main power cord from the outlet, then from the
computer and from all peripheral devices.
4. Disassemble the system to expose the drive bay (see documentation
included with your computer for instructions on accessing the
removable media drive bays).
Installing the DAT AutoLoader
NOTE: Your computer may differ slightly from the following illustrations.
To install the Autoloader with drive rails:
1. Slide the DAT AutoLoader partially into an available removable media
bay.
Figure 2-3. Installing the DAT AutoLoader with drive rails