Compaq 326817-003 - Manual (Page 51)

Operation 4-15
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
Table 4-1
LCD Messages - Alphabetical Listing
continued
LCD Message Message
Type
Meaning
Space
Tape x Status The drive is moving the cassette x media to a specific
location on the media. x represents the cassette number.
TSL10000
Self-Test
Complete Status The DAT AutoLoader has performed its power-on self-test.
Unload
Tape x Status A cassette is being ejected from the drive and returned to the
magazine.
x represents the cassette number.
Updating
Firmware Status Firmware upgrade data is being read either from a cassette
or the SCSI bus.
Verify
Tape x Status The drive is verifying data on cassette x.
x represents the cassette number.
Write
Tape x Status The drive is writing data to cassette x.
x represents the cassette number.