Compaq 326817-003 - Manual (Page 52)

4-16 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
LCD Menu Screens
To enter the menu mode, press and hold the select button for 5 seconds. The
AutoLoader will exit the menu mode if no button is pressed within a 5-second
period.
Table 4-2
LCD Menu Screens
Menu Screen Features
>Version
Auto Load
Unload
Contrast
Orientation
Language
The main menu screen. Pressing the Select button advances the arrow
to the next item on the menu: Prdrives.
Pressing the Enter button selects that sub menu.
TSL10000
SCSI ID#5
Ver.0000
S/NLxxxxxxxx
S/NDxxxxxxxx The version screen displays information about the autoloader including
autoloader and drive serial numbers.
Auto Load
>OFF
ON
The auto load screen allows the auto load feature to be turned on or off.
Pressing the Select button moves the arrow to the other mode. Pressing
the Enter button selects that mode. When auto load is ON and the
AutoLoader is in the one cassette mode, the AutoLoader automatically
loads the cassette into the drive.
Unload
Continuous
>OFF
ON
The Unload Continuous OFF selection only affects the AutoLoader when:
1) the AutoLoader is loaded with 8 cassettes, in the 8 cassette mode, 2)
cassette #8 is in the drive and 3) a SCSI unload command is issued. The
Autoloader will unload cassette #8 and stop.
If Unload Continuous is ON, the AutoLoader will unload cassette #8 and
then load cassette #1 into the drive. Pressing the SELECT button moves
the arrow to the next item on the menu. Pressing the ENTER button
selects that mode.
Contrast
Adjustment The contrast adjustment screen allows the display’s contrast to be
adjusted. Pressing the Select button increases contrast until maximum
contrast is reached. Pressing Select again changes the display to
minimum contrast. The number of darkened bars (see Figure 4-10,
Cassettes position) on the bottom indicates the relative magnitude of the
contrast.
continued