Loading the magazine into the autoloader, Removing the cassettes from the magazine – Compaq 326817-003 User Manual
Page 42
4-6 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
3. For an eight-cassette configuration, insert a cassette in position 8.
CAUTION: The cassettes must be loaded in the order they were originally
placed during backup.
Loading the Magazine into the
AutoLoader
Insert the magazine into the front opening on the AutoLoader in the direction
of the arrow. The AutoLoader pulls the magazine in the rest of the way.
Figure 4-8. Loading the magazine into the DAT AutoLoader
The AutoLoader does a rotation check of the cassettes. If there is an incorrect
cassette configuration the AutoLoader ejects the magazine. See “Loading the
Magazine with Cassettes” for the correct configurations.
Removing the Cassettes from
the Magazine
NOTE: Compaq recommends storing the magazine with the cassettes loaded to ensure
they are in the correct order.
1. Hold down the magazine stopper
➊ in the direction of the arrow while
removing cassettes.