Automatic dialing mode setting, Conosctsog iha tetephoine iioi© aod, Power ouilett – Panasonic KX-FP200 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
t;
ta
C/)
Jiá
o
■5
o
c
.2
TO
75
(0
c
ConosctSog iha tetephoine iioi© aod
th®
power
ouilett
1. Connect the handset and handset cord.
2. Connect the telephone tine cord.
3. Connect the power cord.
oThe unit will print an information list.
Note:
oFor additional equipment protection, we recommend the use of a surge protector. The following types are
available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 {TRIPPE
MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
oWhen you operate this product, the power outlet should be near the product and easily accessible.
Automatic dialing mode setting
When the power cord is connected, the unit will start detecting the dialing mode.
Display:
CHECKING LINE
Wait until one of the following messages is displayed.
—If your line has touch tone service, the unit will display the following message.
LINE IS TONE
—If your line has rotary pulse dial service, the unit will display the following message.
LINE IS PULSE
o|f you connect the power cord before connecting the telephone line cord, the following messages will be
shown alternately.
CONNECT TEL LINE
TEL LINE IS OPEN
Connect the telephone line cord.
oif the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when
power is restored.
oYou can change the dialing mode setting manuaiiy. See “Setting the dialing mode” on page 46.
10
For Assistance, Call 1 -800-435-7329