Panasonic KX-FP200 - Manual (Page 38)

IR®m® 1 i© te reseiwiinig
(ysiiinig aim exieosDom pluone to receive a fa}^ message)
If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive a
manual fax message. Using the extension phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing f START/COPY/SETl.
Important:
oTo activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
oThe remote fax activation code is set to “*9” as a pre-selected setting.
Beceovimg usomg am extemsiom phome--------------------------------------
1 When a call is received, lift the handset of the
extension phone.
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
Hang up the handset.
oThe facsimile unit is activated for reception.
Glhamgomg the remote fax actovatiom code
This code can be from 2 to 4 digits in length using numbers
^ Press [MENU].
Display:
4 Í
iQ)
7
SYSTEM SET UP
Press [^, then Q].
REMOTE FAX ACT.
Press (START/COPY/SET).
MODE=ON [ 7 A ]
Press @ or (A) to select the desired setting.
o|f this feature is not required, select “OFF”.
Press [START/COPY/SET],
CODE=* 9
Enter the new code number.
Press [ START/COPY/SET ]■
Press [MENU],
0 through 9, and the character *.
Dial keypad fMENÚ]
CD©CD¡
GDCD®!
® ® ®!
' r
------ T
o
[START/COPY/SET]
Note:
©Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, all or
part of the remote fax activation code must
be different from the service access code,
olf the remote fax activation code is set to
“ 0000”, this feature will not work properly.
38