Tore recgyesising help, General, Fax transmission – Panasonic KX-FP200 User Manual

Page 61

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

tore recgyesiSing help

General

PROBLEM

CAUSE & REMEDY

I cannot make and receive calls.

oThe power cord or telephone line cord is not connected. Check the

connections (see page 10).

1 cannot make calls.

oThe dialing mode setting is wrong. Check the setting and change it

to TONE or PULSE (see “Setting the dialing mode” on page 46).

The unit does not work.

o Disconnect the unit from the telephone line and connect to a

known working phone. If the known working phone operates

properly, call your service center to have the unit repaired. If the
known working phone does not operate properly, consult with your

telephone company.

The unit does not ring.

oThe ringer volume is set to OFF. Adjust to a suitable level {see

page 16).

The REDIAL/PAUSE button does

not function properly.

o|f this button is pressed during dialing, a pause will be inserted, if

pressed immediately after a dial tone is obtained, the last number

dialed will be redialed.

The receive mode does not function

as explained on page 19.

oA distinctive ringing pattern is set. Check it (see page 40).

During programming, 1 cannot enter

the remote fax activation code or
the remote TAM activation ID.

oAll or part of the number is the same as another code or ID.

Change the number {see pages 24 and 38).

Fax Transmission

PROBLEM

CAUSE & REMEDY

The other party complains that

letters on their received document
are distorted.

o|f your line has special telephone services such as call waiting, the

service may have been activated during fax transmission. Connect

the unit to a line that does not have such services.

oAn extension telephone on the same line is off the hook. Hang up

and try again.

The other party complains that dirty

patterns or black lines appear on

their received documents.

oThe glass or rollers are dirty. Clean them {see page 69).

The other party complains that they
cannot send documents.

oThe junk mail prohibitor is set to ON. Program their facsimile

number for automatic dialing {see page 27) or set the junk mail
prohibitor to OFF {see page 39).

1 cannot make an international fax

call.

oUse the overseas transmission mode (see page 47).

oAdd two pauses at the end of the phone number (see page 31).

For Assistance, Call 1-800-435-7329

61

Advertising