Panasonic KX-FP200 - Manual (Page 49)

Rec©i¥imig owersiiedl dlocyinnieniti
When the size of the documents sent by the other party is as large as, or larger than the recording paper, the
unit can reduce each page of the document and print it out on the recording paper by programming a suitable
reduction rate.
The reduction rate is determined by a combination of the size of the recording paper and received document.
□ Recommended reduction rate;
Mode Size of recording paper Size of original document
OFF Legal Letter, A4
92%
(pre-selected)
Letter Letter
Legal Legal
86% Letter A4
72% Letter Legal
Letter^ 216 x 279 mm ( 8V2" x 11")
Legal = 216 x 356 mm { 8V2" x 14")
A4 = 210 X 297 mm {may not be available in the United States.)
To program a reduction rate, proceed as follows:
Press [MENU],
Display:
Press then 0 0-
1
SYSTEM SET UP
RX REDUCTION
Press [START/COPY/SETÌ.
MODE=92% VA]
4 l
Press @ or @ to select the desired setting.
o|f this feature is not required, select “OFF”.
Press fSTART/COPY/SET).
Press [MENU].
Note;
oThis feature is not available when the film/paper save reception feature is set to ON (see page 48).
oDocuments received by facsimile frequently have a heading on the top of each page which contains the
sender’s name/phone number. This increases the length of each page. Therefore, it is recommended to use
the reduction mode.
o|f the appropriate reduction rate is not programmed, the document will be divided.
49