Panasonic KX-FP200 - Manual (Page 24)

■XToTAI^i mode
(coni)
Secyiring the remote operation for the answering machine
(remote TAM activation ID)_________________________________
Some remote codes on your answering machine may be same as the remote fax activation code on the
facsimile unit. This feature prevents the facsimile unit from activating the fax function when you operate the
answering machine from a remote location using the same remote code.
Set the same remote access code on the answering machine to the facsimile unit as the remote TAM
activation ID.
Important:
oThis ID should be different from the remote fax activation code (see page 38).
1 Press [MENU],
4
Display: SYSTEM SET UP
Press then |T| ¡^.
REMOTE TAM ACT.
Press f START/COPY/SET ].
MODE=OFF [ V A ]
Press @ or (§) to select “ON".
MODE=ON [ V A ]
Press [ START/COPY/SET 1.
ID=11
7
Enter your remote TAM activation ID number
using the dial keypad.
Press fSTART/COPY/SETl.
Press [MENU],
Dial keypad [MENU]
oThe display will show the pre-selected ID.
©This ID can be from 1 to 5 digits in length
using numbers 0 through 9, and the characters
* and #.
[START/COPY/SET] ^
Leaving a voice message andl sending fax documents to
The caller can leave a voice message and send a fax document in the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your unit.
oThe external telephone answering machine will answer their call.
2. The caller can leave their message after the greeting message.
3. Have the caller press 0 (remote fax activation code).
oThe facsimile unit will activate the fax function.
4. The caller must then press their start button to send a document.
Note;
oThe remote fax activation code can be changed. See page 38.
24