Panasonic Panafax UF-322 - Manual (Page 25)

User Parameters
Setting Your ID Number (Fax Telephone Number)
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine’s display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number for up to 20 digits long.
I
j^nJNCTlONj
SET MODE (1-5)
ENTER NO. OR A V
2
1:USER PARAMETERS?
PRESS SET TO SELECT
3 ^
3 repeatedly until display shows; ID NO.
2
Enter your ID (max. 20 digits) by using the key pad and
I SPACE I.
Ex:[2][0]m[$PACE][5l[Jir^
ISPACEimi^mr^
ID NO.
201 555 1212
If you make a mistake, press I CLEAR [ to erase the
number then reenter the correct number.
® STOP ■HP
ffl Nots: 1. You may use ® to enter a character at the beginning of the ID number to indicate the following
digit(s) for your country code.
Ex: +1 201 555 1212 +1 for U.S.A. country code.
+81 3 111 2345 +81 for Japan country code.
2. For some countries, this feature is not available depending on the country's regulation.
The display may not show this feature.
25