Panasonic Panafax UF-322 - Manual (Page 98)

Compatibility with Other Machines
Table 1 shows how your machine fits in with the compatibility requirements of the different kinds of facsimile
stations which make up a Network for Confidential Communications, it also shows whether or not special
settings are required.
Table 1: Confidential Communication Requirement
Station Compatible Model
Initial Sending Station
Panafax 145
Panafax 155
UF-140
UF-150
UF-160, UF-160M
UF-170, PD-170E
UF-250, UF-260
UF-270, UF-270M, UF-280M
UF-300, UF-312, UF-322
UF-620, UF-640, UF-650
UF-733, UF-750, UF-750D
UF-755, UF-766
Confidential Center Station UF-620, UF-640. UF-650
End Receiving Station
Panafax 145
Panafax 155
UF-140
UF-150
UF-160, UF-160M
UF-170, PD-170E
UF-250, UF-260
UF-270, UF-270M, UF-280M
UF-300, UF-312, UF-322
UF-620, UF-640, UF-650
UF-733, UF-750. UF-750D
UF-755. UF-766
Special Settings
Required. Please refer to
the individual User’s
Guides of each machine.
Setting Up Your Machine for Confidential Network Communications
To use Confidential Communications, you must first preset the Confidential Communication Fax Parameter
described below. Then, every time you actually send a Confidential Fax you must set a Confidential Code.
1. Confidential Communication Fax Parameter
This switches the Confidential Communications function to InvalidA/alid.
2. Own Telephone Number
The full telephone number should be entered.
3. Network Password and Polling Password
You may use Network Password and Polling Password to prevent outside facsimile(s) from using the
Confidential Communication network. The same password must be provided to all the machines inside
the network.
4. Confidential Code
A 4-digit code must be assigned to each Confidential Fax you send. It identifies the fax when it is stored
in the Relay Station. The receiving person must know the code in order to poll the fax from the Relay
Station.
98