Panasonic Panafax UF-322 - Manual (Page 38)

LQ«cU^J>Qeun:iem« j \ ;
How to Load Documents
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 30 PAGES {see Note 1) on the ADF at one time. If you have more than 30 pages, wait until transmission
or storing in memory starts as pages feed through, place any remaining pages on top of the last page in
the feeder.
3. Adjust the Document Guides to center the document on the ADF.
CORRECT INCORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to
DOCUMENT SET. You can now change basic transmission settings, or begin the dialling procedure.
DOCUMENT SET
ENTER STATION 00 %
m
Note: 1. The document limitation to send muitiple pages is as follows.
38
Document Size Document Thickness
Up to 20 pages Up to 280 mm x 364mm 0.06 mm to 0.12 mm
Up to 30 pages* A4 size or Letter size 0.06mm to 0.10 mm
* Paper that have rough surface may not be able to utilize all 30 pages even if the size and thickness
specification are met.
2. Transmitting documents longer than 356 mm requires user’s assistance.