Setting the там interface mode, Operation of tam interface mode – Panasonic Panafax UF-322 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the ТАМ Interface Mode
Change Fax Parameter No. 16 (UNATTENDED MODE) to 2: TAM 1 / F. (see page 33)
1
2
RCV MODE
Confirm that the lamp is ON and the display as shown to the
right.
08-DEC-1993
15:00
I
RCV MODE-FAX/TAM 00%l
Operation of TAM Interface Mode
1
When your TAM and Fax receives an incoming call, the TAM always answers the call first
and then the TAM sends an OGM (Outgoing Message) recorded in your TAM to the calling
station. During the time the TAM is answering the call, your fax machine will be monitoring
the line to distinguish whether it is a voice or fax call.
If the call is Fax call,
2a
Your machine will switch the line to the
fax and then begins to receive the
documents immediately from the
calling station.
If the call is Voice call,
2b
Your TAM continues to record a
message (ICM) after sending out an
OGM.
Sample of OGM
Hello, this is Smith. Sorry I am unable to take your call. Please leave your message after the
beep or if you are calling to send a fax, press the asterisk button twice on your touch tone
phone now and start your machine. Thank you for calling.
61