Panasonic Panafax UF-322 - Manual (Page 33)

Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 ORIGINAL 1 Normal Setting home position of the ORiGINAL key.
2 Light
3 Dark
02 RESOLUTION 1 Standard Setting home position of the RESOLUTION key.
2 Fine
3 S-Fine
04 STAMP 1 Off Setting home position of the STAMP key.
To select the stamp function when document is stored in memory
(see Fax Parameter No. 28).
2 On
05 MEMORY 1 Off Setting home position of the MEMORY key.
2 On
06 DIALING METHOD 1 Pulse Selecting dialling method.
2 Tone
07 HEADER PRINT 1 Inside Selecting printing position of the header.
Inside ; Inside TX copy area.
Outside : Outside TX copy area.
No print: Header is not printed.
2 Outside
3 No print
08 HEADER FORMAT 1 Logo. ID No. Selecting header format.
2 From To
09 RCV'D TIME PRINT 1 Invalid Selecting whether or not the machine prints received time, page
no, and remote ID on bottom of each received page.
2 Valid
10 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
2 Soft
3 Loud
12 COMM. JOURNAL 1 Off Selecting home position of printout mode for COMM. Journal
Off/>Wways/lnc. only.
Off : No printout
Always : Always prints out
2 Always
3 Inc. only
Inc. only : Printout when communication has failed.
13 AUTO JOURNAL 1 invalid Selecting whether or not the machine prints the journat
automatically after every 32 transaction.
2 Valid
15 ATTENDED MODE 1 Tel Selecting attended mode either Telephone Mode or Fax/Tel Auto
Switching Mode.
2 Faxnrel SW
16 UNATTENDED MODE 1 Fax Selecting attended mode either Fax Mode or TAM interface
Mode.
2 TAM l/F
Continued on the next page.
33