Setting the fax / tel auto switching mode, Operation of fax / tel auto switching mode, Beetlvtng document – Panasonic Panafax UF-322 User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Beetlvtng Document^ .

. ;

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.

Setting the Fax / Tel Auto Switching Mode

Change Fax Parameter No. 15 {ATTENDED MODE) to 2: Fax / Tel SW. (see page 33)

1

2

RCV KIODE

a C

Confirm that the lamp is OFF and the display as shown to
the right.

08-DEC-1993 15:00

RCV MODE=FAX/TEL 00%

Operation of Fax / Tel Auto Switching Mode

1

Your machine will soon answer the call when a call is received, then distinguish whether it is
a voice or fax call.

If the call is a Fax call,

2a

Your machine begins to receive the
documents.

If the call Is a Voice call,

2b

Your machine begins signal (ringing)
through the machine’s speaker for
your attention, (see Note)

3b

Lift the fax handset and talk,

or

Lift the handset of your extension
phone and press I STOP Ito talk.

m

Note: The length of time the machine signals can be changed by Fax Parameter No. 18 (OP CALL TIMER)

and the volume can be set by Fax Parameter No. 10 (KEY/BUZZER VOLUME), (see page 33 and 34).

58

Advertising