On-hook dialling, Sending ooqument – Panasonic Panafax UF-322 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Ooqument^
On-Hook Dialling
For On-Hook Dialling, follow these steps
1
Set documentis) face down.
DOCUMENT SET
ENTER STATION
00%
2
TEL/DIAL
You will hear dial tone through the monitor speaker.
DIALLING
3
Dial the telephone number from the keypad.
Ex: [MSEIlCiMlEijH]
Machine will start sending automatically.
* DIALLING *
55512341
ON LINE * XMT *
5551234
m
Note:
1. If you need a special access number to get an outside line, dial it first then press
I PAUSE I
to enter a
pause (represented by a
before dialiing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialiing, press
! TONE
I
(represented by a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit'T.
3. To stop the transmission, press
I
STOP I.
The display shows;
COMMUNICATION STOP?
l-.YES 2;NO
Press
[T]
to stop the transmission.
4. When you hear the voice of the other party through the monitor speaker in step 3, lift the handset of
your external telephone and press \
STOP I
and tell the other party to prepare to receive a document.
Then, when you hear a beep, press
I START I.
43