Printing a test pattern, Sample of test pattern, Printing a test pattern -10 – Panasonic KX-F160 User Manual
Page 114
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Printing a test pattern
You can check the print quality of your unit by printing the test pattern.
If the test pattern has any blurred points or lines or a dirty pattern, please clean the thermal head
following the instructions on page 6-9.
To obtain the test pattern, follow the steps below.
Press the PROGRAM button.
The PROGRAM indicator lights.
Press #, then press 28.
The PROGRAM indicator flashes.
Press the START button.
The unit prints the pattern as shown below.
The PROGRAM indicator lights.
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
Sample of test pattern:
6-10
Advertising