Before transmitting documents, Acceptable documents, Minimum document size – Panasonic KX-F160 User Manual
Page 44: Notes, Documents you cannot send, Before transmitting documents -2, Acceptable documents -2, Documents you cannot send -2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Transmitting Documents
Acceptable documents
The unit can transmit documents that meet the following conditions.
—Documents width should be from 128 mm (5") to 216 mm { 8 W ) .
—Maximum document length should not exceed 600 mm (23^").
—Effective scanning width can be up to 208 mm (
8
^
16
").
—Number of pages that can be set in the document feeder tray can be up to 10 sheets.
—Document weight:
Single sheet: 45 g/m= to 90 g/m^ (12 pound to 24 pound)
Multiple sheets: 60 g/m^ to 75 g/m^ (16 pound to 20 pound)
Minimum document size
128 mm
(5")
( Q W )
NOTES:
•A document whose length exceeds 600 mm (23W') cannot be transmitted. When you feed such
documents, the unit will stop transmitting and a long beep will be heard. If this happens, press
the STOP/CLEAR button and remove the document.
• If a document is electrostatically charged, the automatic document feeder may not function
properly.
Documents you cannot send
Do not use the following types of documents or they may jam. Make a copy of such documents
and feed the copy into the unit.
—Paper with a chemically treated surface such as carbon paper or carbonless duplicating paper
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Small-sized paper such as a slip or voucher
—Thin paper less than 45 g / m ^ (12 pound)
—Thick paper over 90 g/m^ (24 pound)
—Paper with faint contrast between the print and the background
—Paper with printing on the reverse side that can be seen through from the front
(e.g. newspaper)
2-2