Panasonic KX-F160 - Manual (Page 62)

Storing phone numbers for speed dialing
The unit is equipped with 10 stations (0 through 9), each of which can store a phone number.
Each phone number can be programmed up to 30 digits long.
1
2
3
OAUTO t—i) E3 E3
^ J"g 7 ] [niv 8] [9]
C3E5IC5)
[
1
]
2
] [ pef 3 j
[e« 4) [^KL 5)
1
^
6
]
PRS 7 I ^TUV Oj 9 j
f~^ F^r~^
Press the PROGRAM button.
The PROGRAM indicator lights.
Press the AUTO button.
The AUTO indicator lights.
Enter the 1 -digit number (0 through 9) by using the dial
keypad.
The PROGRAM indicator flashes.
Enter the phone number by using the dial keypad.
To insert a hyphen in the number, press the HYPHEN
key during programming.
HYPHEN is counted as 2 digits.
Press the SET button to store the program into memory.
The AUTO indicator goes out and the PROGRAM
indicator lights.
To store in succession, repeat steps 2 to 4.
After programming all the numbers, press the
PROGRAM button to end the operation.
The PROGRAM indicator goes out.
NOTES:
•To correct an error while programming, press the STOP/CLEAR button then repeat from step 2.
•To cancel the programming halfway, press the PROGRAM button.
•To print out a list of the stored phone numbers, press the PROGRAM button, press #, then
press 27, then press the START button. For further details, see pages 5-5 and 5-6.
3-4