Helpful hint, Notes, How to set up – Panasonic KX-F160 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to set up
To set up your unit, proceed as follows.
HELPFUL HINT:
If you press the HELP button
—while programming, the unit will print information about the operation.
—in idle status, the unit will print information about how to send documents, how to set up, etc.
1. Press the PROGRAM button.
The PROGRAM indicator lights.
2. Press #, then enter the code number you wish to set using the dial keypad.
Refer to the lists on pages 1 -24 and 1 -25.
The PROGRAM indicator flashes.
3. Enter desired choice or data.
4. If you entered “#26", “#27”. “#28”, “#50" and “#99”, press the START button.
Otherwise press the SET button to store your selection.
The PROGRAM indicator lights.
5. Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
NOTES:
•When the code number is “#01”, “#02”, “#03" or “#18”, the result of your setting is printed out
automatically after you press the SET button in step 4.
•To correct an error while programming, press the STOP/CLEAR button then repeat from step 2.
•To cancel programming on the way, press the PROGRAM button.
1-26