Installing the microcassette tape, Notes, Installing the microcassette tape -11 – Panasonic KX-F160 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the microcassette tape
The microcassette tape is used to record incoming messages.
To install a microcassette tape:
1
2
Pull up the cassette compartment cover.
Insert the microcassette tape into the
compartment with the full reel to the left.
Make sure that there is no slack in the tape.
Remove any slack by using a pencil and rotating
the tape reel.
Push the microcassette tape down.
Then close the cassette compartment cover.
Lift the microcassette tape as shown, then take
it off.
NOTES:
•For optimum sound quality and performance, use the opposite side (side B) after six months
and replace the tape with a new one every year, assuming that the unit answers about ten calls
a day.
• Never place a cassette tape near a magnetic source such as a magnet or a TV set. It may erase
or interfere with any messages on the tape.
•Should the cassette tape break or become worn, replace it with a new one. We recommend
using the Panasonic cassette tape MC-30 or MC-60.
1-11