Setting the message alert, Setting the message alert -23 – Panasonic KX-F160 User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Message Alert
When this feature is on, the unit will let you know with an alert if a caller’s message has been
recorded or not.
When a new message is recorded in the ANS/FAX mode, a stow beep will sound and the
indicator will blink. When you hear the beep sound, play back the message(s), the beep sound
will stop and the indicator will stop blinking.
To set the message alert:
Press the PROGRAM button.
The PROGRAM indicator lights.
Press #, then press 22.
The PROGRAM indicator flashes.
Press 1 to activate this feature.
Setting selections are:
1: ON (activate this feature)
2; OFF (deactivate this feature)
Press the SET button to store your selection into
memory.
The PROGRAM indicator lights.
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out
4-23