Notes, Storing phone numbers for one touch dialing – Panasonic KX-F160 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Storing phone numbers for one touch dialing
This unit is equipped with 12 direct call station keys including SECRET and HYPHEN keys, each
of which can store a telephone number. Each phone number can be programmed up to 30 digits
long.
1
3
C3EEED
I cm
4
] [.nc-
5
] [
MHO 6
]
[wa
7
] [
tuv
s] [ 9 ]
QSQ
Press the PROGRAM button.
The PROGRAM indicator lights.
Press one of the direct call station keys where you want
to store the phone number.
The PROGRAM indicator flashes.
Enter the phone number by using the dial keypad.
If you want to insert a hyphen in the number, press the
HYPHEN key during programming.
HYPHEN is counted as 2 digits.
Press the SET button to store the program into memory.
The PROGRAM indicator lights.
To store in succession, repeat steps 2 to 4.
After programming all numbers, press the PROGRAM
button to end the operation.
The PROGRAM indicator goes out.
NOTES:
•While storing, pressing the PAUSE or FLASH or TONE button once counts 1 digit.
•To correct an error while programming, press the STOP/CLEAR button then repeat from step 2.
•To cancel the programming halfway, press the PROGRAM button.
•To print out a list of the stored phone numbers, press the PROGRAM button, press #, then
press 27, then press the START button. For further details, see pages 5-5 and 5-6.
3-3