Panasonic KX-TG2670N User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing the Answering System
Programming Summary for the Answering System
You can program the following functions
using the handset near the
base unit. Make sure the unit is in the standby mode initially.
•You can exit the programming mode any time by pressing
(OFF],
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If 6 beeps sound on the base unit during programming, a wrong key was
pressed. Enter the correct number.
•If the handset has lost communication with the base unit, 3 beeps sound and
“No
link to base. Place on cradle and try again.”
is displayed on the
handset.
20