Panasonic KX-TG2670N - Manual (Page 24)

Preparing the Answering System
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “Toll saver”*.
Your phone comes from the factory set to “Toll saver”*.
8
Press IPUNCTION/CHI.
Press ® or ® repeatedly until the arrow
points to “Program”.
►Save directory
Ringer volume
T A ►=Yes
►Program
Calling pager
T A ►-Yes
Press 0 (Yes key).
Press ® or ® repeatedly until the arrow
points to "
tad program”.
Press 0 (Yes key).
•The base unit display shows programming
options.
Press
•The current setting is displayed on the base
unit.
►Save DIRECT#
Set flash time
T A ►=Yes
Set dial mode
►TAD program
T A ►=Yes
Answering
system setting.
See base unit.
Base unit display
Number of rings
:Toll saver
Press (o), or to (?] to set the number of rings.
0: Selects “Toll saver"*.
2-7: The unit will answer after the selected number of rings.
Press 0 (Save key).
•A beep sounds.
•To return to the standby mode, press [OFF].
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
24