Pager call, Storing a pager number – Panasonic KX-TG2670N User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pager Call
This feature allows you to alert your pager when the unit records an
incoming message or receives a Caller ID call (p. 32). You can retrieve
the message from a touch tone telephone (p. 64). If you subscribe to a
Caller ID service, the caller’s telephone number will be displayed on your
pager. First program the following settings (p. 58-62), then set the unit to
call the pager.
Use the handset near the base unit.
Make sure that the unit is in the standby mode initially.
Storing a Pager Number
if you use a 1-800 pager number, see the next page for the storing
procedure.
Press I
FUNCTION/^.
1
Press ® or @ repeatedly until the arrow
points to “Program”.
Press B (Yes key).
Press ® or B repeatedly until the arrow
points to “TAD program”.
Press B (Yes key).
•The base unit display shows programming
options.
►Program
Calling pager
T A
►=Yes
►Save DIRECT#
Set flash time
| T A
►=Yes
Set dial mode
►TAD program
T A
►=Yes
Answering
system setting.
See base unit.
Press [¥).
Base unit display
Enter your pager number, and press
iREDIAUPAUSEl
twice.* Enter
the access code, if required by your pager company, and press
IREDIAL/PAUSEI
twice again.*
•The entered number is displayed on the base unit.
•If you misdial, press ICLEARl and enter the correct number.
•You can enter a total of 44 digits.
58