Storing a 1-800 pager number – Panasonic KX-TG2670N User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
Press 0 (Save key).
•A beep sounds.
•To return to the standby mode, press
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing
[REDlAL/PAUSEl
once creates a
3.5 second delay and counts as one digit.
•If the line has rotary or pulse service, press
(TONE]
between the pager number
and
iREDIAUPAUSEl
in step 7.
Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager
number as follows.
1
Follow steps 1 through 6 on page 58.
© Enter the 1-800 pager number, and press I
repial
/
paus
E]
3 times.*
CD
Enter the PIN code, and press
[REDlAL/PAUSEl
twice.*
•The entered nuimber is displayed on the base unit.
•If you misdiai, press
[CLEAR]
and enter the correct number.
•You can enter a total of 44 digits.
Press 0 (Save key).
•A beep sounds.
_____
•To return to the standby mode, press
lOFFl.
* Pager companies require a delay after the pager number and the PIN
code are dialed. Contact your pager company regarding the required
pause time. Pressing [
redial
/PAUSEI once creates a 3.5 second
delay and counts as one digit.
*lf the line has rotary or pulse service, press
[TONEl
between the pager number
and
[REDIAL/PAU^
in step 2.
»Aiphanumeric voice dispatch pager services will not work with this function.
59