Panasonic KX-TG2670N - Manual (Page 40)

One-Touch Dialer
You can store a phone number in the I DIRECT) button of the handset. The
stored number is dialed with a one-touch operation.
storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1 Press [FUNCTION/CHl.
Press ® or ® repeatedly until the arrow
points to “Program".
Press B (Yes key).
While the arrow points to “save
DIRECT#”,
press (B (Yes key).
Enter a phone number, up to 22 digits.
•Each time you press [CLEAR) the digit to the
left of the cursor is erased. To erase all digits,
press and hold
(CLEAR).
•To move the cursor, press (B or (B-
Press ® (Next key).
•If you want to edit the entered number, press
(B (Edit key) and return to step 5.
Press ® (Save key).
•A beep sounds. ____
•To return to the standby mode, press [OFF].
►Program
Calling pager
TA ►=Yes
►Save DIRECT#
Set flash time
TA ►=Yes
T=Next
1234567890123456
789012
T=Next
1234567890123456
789012
A=Edit ►=SavG
1234567890123456
789012
Save DIRECT#
•You can exit the programming mode any time by pressing
•If a pause is required for dialing, [REDIAUPAUSE[ can be stored in a phone
number in step 5. This counts as one digit (p. 52).
40