Panasonic DMC-FS5 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Preparation

Press [MENU/SET],

Press ◄/► to select the items (year, month,

day, hour, minute or display sequence), and

press A/V to set.

(A):

Time at the home area

Time at the travel destination (P58)

tt

]: Cancel without setting the clock.

Press [MENU/SET] to set.

• After completing the clock settings, turn the camera off. ‘

Then turn the camera back on, switch to recording mode, and oheck that the display

reflects the settings that were performed.

• When [MENU/SET] has been pressed to complete the settings without the clock having

been set, set the clock correctly by following the “Changing the clock setting (In normal
picture mode)” procedure below.

1

Press [MENU/SET].

2

Press

A/T

to select [CLOCK SET].

3

Press

and then perform steps 3 and 4 to set the clock.

4

Press [MENU/SET] to close the menu.

• You can also set the clock in the [SETUP] menu. (P21)

., Note

•The clock is displayed when [DISPLAY] is pressed several times during recording.
•When a fully charged battery has been inserted for more than 24 hours, charging of the built-in

battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged,

the length of time that the clock setting is stored may become less.)

•You can set the year from 2000 to 2099. The 24-hour system is used.
• If the clock is not set, the correct date cannot be printed when you stamp the date on the

pictures with [TEXT STAMP] (P74) or order a photo studio to print the pictures.

• If the clock is set, the correct date can be printed even if the date is not displayed on the screen

of the camera.

VQT1M97

17

Advertising