Panasonic DMC-FS5 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I About the battery charger

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT

THE VENTILATION VENTS.

Battery charger

This battery charger operates on AC between 110 V and 240 V.

But

• In the U.S.A, and Canada, the battery charger must be connected to a 120 V AC power

supply only.

• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit

the AC outlet configuration.

■ Care of the camera

• Do not strongly shake or bump the camera by dropping it etc.

This unit may malfunction, recording pictures may no longer be possible or the

lens or the LCD monitor may be damaged.

•We strongly recommend you do not leave the camera in your pants pocket

when you sit down or forcefully insert it into a full or tight bag etc.

Damage to the LCD monitor or personal injury may result.

^

• Be particuiariy careful in the following places as they may cause this .

unit to malfunction.

/ /

- Places with a lot of sand or dust.

j j

-

Places where water can come into contact with this unit such as when using

it on a rainy day or on a beach.

• Do not touch the lens or the sockets with dirty hands. Also, be careful not to allow

liquids, sand and other foreign matter to get into the space around the lens, buttons etc.

• If water or seawater splashes on the camera, use a dry cloth to wipe the camera body

carefully.

■ About Condensation (When the lens Is fogged up)

•Condensation occurs when the ambient temperature or humidity changes. Be careful of

condensation since it causes lens stains, fungus and camera malfunction.

• If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will

disappear naturally when the temperature of the camera becomes close to the ambient

temperature.

■ Read together with the “Cautions for Use”. (P91)

■ About illustrations in these operating instructions

The procedure is described tor DMC-FS5 as an example.

VQT1M97

5

Advertising