Panasonic DMC-FS5 - Manual (Page 87)

Connecting to other equipment
Press
A
to select [PRINT START] and then press
[MENU/SET],
• Refer to P87 for the items which can be set before starting to print
the pictures.
• Press [MENU/SET] to cancel printing.
• Disconnect the USB connection cable after printing.
MULTI SELECT
PRINT WITH DATE
NUM. OF PRINTS
1
PAPER SIZE
PAGE LAYOUT 8^
cancelsq select : SET
Select and set the items both on the screen in step 2 of the
“Seiecting a single picture and printing it” and in step 3 of the
“Selecting multiple pictures and printing them” procedures.
•When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [^]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•When [DPOF PICTURE] has been selected, the [PRINT WITH DATE]
and [NUM. OF PRINTS] items are not displayed.
UULT! SELECT
PRINT START
CANCEL® SELECTOEXITIBi
[PRINT WITH DATE]
..... Item ....... ..................................... Description of settings.........................................
[OFF] Date is not printed.
[ON] Date is printed.
• If the printer does not support date printing, the date cannot be printed on the picture.
• Since the printer's settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
® Note
When asking the photo shop to print the pictures
• By stamping the date using [TEXT STAMP] (P74) or setting date printing at the time of the [DPOF PRINT]
(P80) setting before going to a photo shop, the dates can be printed at the photo shop.
[NUM. OF PRINTS]
You can set the number of prints up to 999.
VQT1M97
87