Panasonic DMC-FS5 - Manual (Page 57)

Advanced (Recording pictures)
[REC] mode: Q3BOHEE1
Usefyi Functions atTra¥el Destinations
For details on the [SETUP] menu settings, refer to PI9.
If you set the departure date of the vacation in advance, the number of days that have
passed since the departure date {which day of the vacation it is) is recorded when you take
the picture. You can dispiay the number of days that have passed when playing back the
pictures and stamp it on the recorded pictures with [TEXT STAMP] (P74).
•The number of days that have passed since the departure date can be printed out using the
“PHOTOtunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).
Select [TRAVEL DATE] from the [SETUP] menu, and
then press ►.
Press
T
to select [SET] and then press [MENU/
SET],
Press AITKIN to set the departure date (year/
month/day), and then press [MENU/SET].
Press A/T/-4IP- to set the return date (year/month/
day), and then press [MENU/SET].
• If you do not want to set the return date, press [MENU/SET] while
the date bar is displayed.
Press [MENU/SET] to close the menu.
cMcaescLftr;.
cfNC-.saiic :*
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
• When the travel date is set, [|[QJ appears on the lower right of the screen.
■ Canceling the travel date
The travel date is automatically canceled if the current date is after the return date. If you
want to cancel the travel date before the end of the vacation, select [OFF] on the screen
shown in step 2 and then press [MENU/SET] twice.
Note
•The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P58) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
VQT1M97
57