Panasonic DMC-FS5 - Manual (Page 84)

Connecting to other equipment
Double-click on [Removable Disk] in [Wly Computer].
• When using a Macintosh, the drive is displayed on the desktop. (“LUMIX",
or “Untitled” is displayed.)
“NO_NAME”
Double-click [DCIM] folder.
j Using a drag-and-drop operation, move the pictures you want to
...... acquire or the folder storing those pictures to any different folder on
the PC.
■ Disconnecting the USB connection cable safely
• Proceed with the hardware removal using “Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
' Note
•Do not use any other USB connection cables except the supplied one.
•Turn the camera off before connecting or disconnecting the AC adaptor (optional: DMW-AC5PP).
•Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory
card.
I Viewing the contents of the built-in memory or card using the PC (folder
composition)
• Builf-lrimeriiory;
DCIM
100_PANA
lAc:
101_PANA
999_PANA
MiSC
o
©
Folder number
File number
HlOO_PAN^
^PIOOpOOl JPG^
-P1000002.JPG
Lpi000999.JPG
© JPG;
MOV:
MISC:
Pictures
Motion pictures
DPOF print
Favorite
A new folder is created when pictures are taken in the following situations.
•After [NO.RESET] (P23) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•When there is a picture with file number 999 inside the folder
84