Panasonic DMC-FS5 User Manual

Page 92

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Electromagnetic wave radiation generated by microprocessors may adversely affect the

camera, disturbing the pictures and sound.

• If the camera is adversely affected by electromagnetic equipment and stops functioning

properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-AC5PP;
optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on.

Do not use the camera near radio transmitters or high-voltage lines.

• If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may

be adversely affected.

Always use the supplied cords and cables. If you use optional accessories, use the
cords and the cables supplied with them.

Do not extend the cords or the cables.

Do not spray the camera with insecticides or volatile chemicals.

• If the camera is sprayed with such chemicals, the body of the camera may be damaged and the

surface finish may peel off.

•Do not keep rubber or plastic products in contact with the camera for a long period of time.

Cleaning

Before cleaning the camera, remove the battery or disconnect the power plug from

the outlet. Then wipe the camera with a dry soft cloth.

•When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,

and then with a dry cloth.

•Do not use solvents such as benzene, thinner, alcohol, kitchen detergents, etc., to clean the

camera, since it may deteriorate the external case or the coating may peel off.

•When using a chemical cloth, be sure to follow the accompanying instructions.

About the LCD momtor

•Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD

monitor and it may malfunction.

• If the camera is cold when you turn it on, the picture on the LCD monitor will be slightly darker

than usual at first. However, the picture will return to normal brightness when the internal
temperature of the camera increases.

Extremely high precision technology is employed to produce the LCD monitor screen.
However there may be some dark or bright spots (red, blue or green) on the screen.

This is not a malfunction. The LCD monitor screen has more than 99,99% effective

pixels with a mere 0.01% of the pixels inactive or always Ilf. The spots will not be
recorded on pictures on the built-in memory or a card.

About the Lens

•Do not press the lens with excessive force.
•Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it

to malfunction. Also, be careful when placing the camera outside or near a window.

Battery

The battery is a rechargeable lithium ion battery. Its ability to generate power comes
from the chemical reaction that takes place inside it. This reaction is susceptible to

92

VQT1M97

Advertising