Panasonic DMC-FS5 - Manual (Page 94)

About the picfure data
• Recorded data may be damaged or lost if the camera breaks down due to inappropriate
handling. Panasonic will not be liable for any damage suffered due to loss of recorded data.
About tripods
•When you use a tripod, make sure the tripod is stable when this unit is attached to it.
•You may not be able to remove the card or the battery when using a tripod.
• Make sure that the screw on the tripod is not at an angle when attaching or detaching the
camera. You may damage the screw on the camera if you use excessive force when turning it.
Also, the camera body and the rating label may be damaged or scratohed if the camera is
attached too tightly to the tripod.
• Read the operating instructions for the tripod carefully.
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
^ The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are
moved to [LOCK], Move the switch back to unlock it. (PI 6)
[NO VAWD:PIGTURETOF:LA¥|:\- i : V p ■ . V V ■ ; ■ ; ( -V;/.■ ■; ■ p ■ : ■ : ( ■ ■■ V:: (■■ ■■
^ Record a picture or insert a card with a recorded picture and then play it.
[THIS PICTURE IS PROTECTEDl
^ Delete the picture after canceling the protect setting. (P81)
[THIS PICTURE CANNOT BE DELEtED|/[SbME PICTURES CANNOT BE DELETED]
• Pictures not based on the DCF standard cannot be deleted.
^ If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P25)
[NO ADDITIONAL-DELETE SELECTIONS CAN BE MADE] ; : : : ; i
•The number of pictures, which can be set at one time when [MULT!] has been selected for
[DELETE MULTI] (P37), [FAVORITE] (P79), [TITLE EDIT] (P73), [TEXT STAMP] (P74) or
[RESIZE] (P75) has been exceeded.
^ Reduce the number of pictures set, and then repeat the operation.
• More than 999 favorites have been set.
r set for pictures not based on the DCF standard
[CANNOT BE SET ON THIS PICTURE]
• [TITLE EDIT], [TEXT STAtvIP] or [DPOF PRINT] car .
[NOT ENOUGH SPACE ON BUILT-IN MEP.10RY]/[N0T ENOUGH MEMORY ON THE
CARD]
•There is no space left on the- built-in memory or the card.
- When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
94
VQT1M97