Press [e.zooj\/l – Panasonic DMC-FS5 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

•When using the zoom function, an estimate of the focus range will appear in conjunction

with the zoom display bar. (Example: 0.3 m (0.99 ft.)

-x)

f 1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting,

r 2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom

lever to the extreme Tele position. You can enter the digital zoom range by continuously

rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele

again.

■ Extended optical zoom mechanism

When you set the picture size to [[^] (3 million pixels), the 10M (10,1 million pixels)

(DMC-FS5)/8WI (8.1 million pixels) {DIV1C-FS3) CCD area is cropped to the center 3M
(3 million pixels) area, allowing a picture with a higher zoom effect.

r-' Note

•The digital zoom cannot be set when [

ja

] has been selected.

•The indicated zoom magnification is an approximation.
•“EZ” is an abbreviation of “Extended optical Zoom".
•The optical zoom is set to Wide (1 X) when the camera is turned on.
• If you use the zoom function after focusing on the subject, focus on the subject again.
•The lens barrel extends or retracts according to the zoom position. Take care not to interrupt

the motion of the lens barrel while the zoom lever is rotated.

•When using the digital zoom, [STABILIZER] may not be effective.
•When using the digital zoom, we recommend using a tripod and the self-timer (P44) for taking

pictures.

You can zoom at high speed to Tele (maximum zoom position).

The zoom magnification differs depending on the picture size that is set.

Press [E.ZOOJ\/l].

(A)

Optical zoom

(g) Extended optical zoom
© Digital zoom

You can further extend the zoom to the digital zoom range by pressing [E.ZOOM] again when
[DIGITAL ZOOM] (P65) is set to [ON],

•When the maximum picture size has been set:

The zoom stops once at the maximum zoom position of the optical zoom. (©)
When [E.ZOOM] is pressed again, zooming proceeds as far as the maximum zoom position of
the extended optical zoom, (eg))
The colors of the zoom bars and the picture size change, and the picture size changes
temporarily as shown below.

Aspect ratio Pictuic size

m

[@] (DMC-FS5)/[[^] (DMC-FS3)^[|3W]]

itP-J

[Q] (DMC-FS5)/[^[ (DMC-FS3)^[[1|^]

[|75^] (DMC-FS5)/[[

j

3] (DMC-FS3)^][T^]

VQT1M97

33

Advertising