Document Outline

• Table of Contents
  • CAUTION!
• uggestions for Safety
  • Use a standard AC wall outlet
  • ■ Grasp the plug when disconnecting the power supply cord
  • ■ Place the unit where it will be well ventilated
  • ■ Avoid places such as the following:
  • ■ Be sure to place the unit on a flat, level surface
  • ■ Never attempt to repair nor reconstruct this unit
  • ■ Take particular care if children are present
  • ■ If water is spilled on the unit
  • ■ Avoid spray-type insecticides
  • ■ Never use alcohol or paint thinner
  • ■ Disconnect the power supply cord if the unit will not be used for a long time
  • ■ If trouble occurs
• For United Kingdom
• Concerning the Remote Control
  • Battery installation
    • 1 Open the cover.
    • 2 Insert the batteries included with this system.
    • 3 Close the cover.
  • Use of batteries
  • Operation notes
• reparations
  • f Supplied accessories
    • Check the packing carton for these accessories.
• Preparations
  • Connections
    • Connect the FM indoor antenna provided with this system.
• Front Panel Controls and Functions
  • Tuner
    • ■ Tuner control
    • © Timer play button (PLAY TIMER)
    • (2) Timer recording button (REC TIMER)
    • 0 Cancel button (CANCEL)
    • 0 Set button (SET)
    • (D Display select button (DISPLAY)
    • ® Clock/timer button (CLOCK/TIMER)
    • 0 Sleep timer button (SLEEP)
    • @ Compact disc edit-recording mode select button (CD EDIT)
    • (D Tuning mode select button (TUNING)
    • ® Band select button (BAND)
    • 0 FM mode/beat proof button (FM MODE/BP)
    • ® Jog dial (AIJOG)
  • Multi digital display
    • ® Alphanumeric display
    • (Q) Random play indicator (RANDOM)
    • ® Timer on-time indicator (ON)
    • ® Repeat play Indicator ()
    • Timer recording indicator (TiMER REC)
    • Sleep timer indicator (SLEEP)
    • FM stereo indicator (STEREO)
    • Timer off-time indicator (OFF)
    • Quartz lock Indicator (QUARTZ LOCK)
    • Deck 1/deck 2 indicator (DECK 1, DECK 2)
    • Tape direction indicators P-)
    • (^ Muting indicator (MUTING)
    • ® Compact disc edit-recording indicator (EDIT)
    • (@ Tape side indicator (SIDE A, B)
    • @ Automatic tape level setting indicator (ATLS)
    • @ Program indicator (PROGRAM)
    • Matrix display (1-12)
    • ® Over Indicator ( ^ )
    • @) Reverse mode indicators ( ) (c;!^)
    • ® Dolby noise reduction indicator (DOLBY NR)
    • @) Recording indicator (REC)
    • ® Volume level indicator
• Front Panel Controls and Functions
  • (continued)
  • Amplifier
    • ■ Amplifier controls
    • ® Power “STANDBY 6/ON” switch (POWER STANDBY (b/ON)
    • ® Spectrum analysis display
    • @ Full range level display
    • @ Super bass indicator
    • ® Equalizer controls
    • (GRAPHIC EQUALIZER LEVEL)
    • 0 Volume level control (VOLUME)
    • ® Volume preset button (VOL PRESET)
    • ® Remote control signal sensor (SENSOR)
    • 0 Super bass button (SUPER BASS)
    • @ Input select buttons (TAPE, AUX, CD, TUNER)
    • ® Deck 1 cassette holder
    • Ф Reverse-side playback button (О)
    • Ф Stop button (□)
    • Ф Forward-side playback button (I>)
    • , Deck 2 cassette holder
    • Record/record standby button (REC PAUSE)
    • Tape counter reset button (COUNTER RESET)
    • Deck 1 cassette eject button EJECT)
    • 0 Deck 1/deck 2 select button (DECK 1/2)
    • One-touch tape edit buttons (ONE TOUCH TAPE EDIT)
    • 0 Fast-forward/rewind/tape program sensor (TPS) buttons [◄◄ (TPS), (TPS) ►►]
    • ® Dolby noise reduction button (DOLBY NR)
    • @ Reverse mode select button (REVERSE MODE)
    • @ Deck 2 cassette eject button (^ EJECT)
• Front Panel Controls and Functions
  • (continued)
  • Disc tray
  • ® Stop button (□)
  • (J) Disc tray open/close button OPEN/CLOSE)
  • 0 Play button (»
  • @) Headphones Jack (PHONES)
  • ® Skip/search buttons ()
  • ® Pause button (II)
• Remote Control Unit Controls and Functions
  • @ CD input select button (CO)
  • @ Tuner input select button (TUNER/BAND)
  • Muting button (MUTING -20 dB)
  • ^ Preset-tuning buttons (1-10/0)
• Remote Control Unit Controls and
  • Functions (continued)
  • Compact disc controls
    • @ Numeric buttons (1-10/0, +10)
    • @) Program button (PROGRAM)
    • @ Random button (RANDOM)
  • Cassette deck controls
    • ■ Cassette deck section
• Setting the Time of Day
  • Switch on the power.
  • 1 Press CLOCK/TIMER.
  • 2 Select the CLOCK mode by turning the jog dial.
  • 5 Press SET.
  • 6 Turn the jog dial to the correct minute.
  • 7 Press SET,
• Basic Operating Procedure
  • 1 Press POWER STANDBY 6 /ON to switch on the power.
  • 2 Select the sound source by pressing TAPE, CD or TUNER.
  • 3 start the sound source.
  • 4 Adjust the volume level.
  • Press the muting button on the remote control.
  • Reduce the volume level.
  • Connect the headphones to the headphones jack.
• Listening to Radio Broadcasts
  • 1 Press the TUNER input select button.
  • 2 Press TUNING to select the MANUAL tuning mode.
  • 3 Press the band-select button to select FM, LW or MW.
  • 4 Turn the jog dial to tune in the desired broadcast.
• Listening to Radio Broadcasts
  • Automatic tuner operation only for FM
    • 1 Press the TUNER input select button.
    • 2 Press the band-select button to select FM.
    • Press TUNING to select the AUTO tuning mode.
    • 4 Turn the jog dial clockwise or counterclockwise and then release it.
  • Memory presetting
• Listening to Radio Broadcasts
  • ■ From the main unit
  • 1 Press the band-select button to select FM, LW or MW.
  • 2 Press TUNING to select PRESET.
  • 3 Turn the log dial to select the desired preset channel.
  • ■ From the remote control
  • 1 Press TUNER/BAND to select FM, LW or MW.
  • 2 Press the numeric button corresponding to the preset channel you wish to tune in.
  • ■ Most recent memory
• Listening to Compact Discs
  • Sequential play
    • Press the CD input select button.
    • Press OPEN/CLOSE to open the disc tray. Insert the disc with label facing up.
    • 3 Press OPEN/CLOSE to close the disc tray.
    • Press the CD play button.
    • ■ To temporarily stop the disc play
    • Press the pause button.
    • ■ To stop the disc play
    • Press the stop button.
• Listening to Compact Discs
  • Direct access play
    • ■ From the main unit
    • 1 Press the CD input select button.
    • 2 Turn the jog dial to select the track where you want to begin play.
    • 3 Press the play button.
    • ■ From the remote control
    • 1 Press the CD input select button.
    • 2 Press a numeric button to select the desired track number.
  • Program play , '
    • ■ From the main unit
    • 1 Press the CD input seiect button.
    • 2 Turn the jog dial to select the track you want to play.
    • 3 Press SET.
    • 4 Repeat steps 2 and 3 for each track you wish to program in sequence.
    • 5 Press the CD play button.
    • ■ Program memory function
• Listening to Compact Discs
  • 4 Repeat step 3 until you have completed the program.
  • 5 Press the CD play button.
  • 3 Press the numeric buttons to select the track numbers.
  • ■ Changing the program
  • Press CANCEL (front panel or remote control) in the stop mode.
  • ■ To add the entry
  • ■ To confirm the program
  • While in stop mode, press the skip/search button.
  • ■ To cancel program play
• Listening to Compact Discs
  • 1 Press the CD input select button.
  • 2 Press RANDOM on the remote control while player is in the stop mode.
  • ■ To cancel random play
  • Press RANDOM once again to end random play.
  • Special features
    • ■ Skip function
    • While in play mode, press or
    • skip button momentarily until you locate the desired track.
    • ■ Search function
    • While in play mode, press and hold one of the search buttons. Release the button when you have reached the desired point.
• Listening to Compact Discs
  • ■ To cancel repeat play Press REPEAT once again.
• iListening to Tapes
  • To play back prerecorded cassettes
    • Press the TAPE input select button.
    • Press EJECT, and then insert the cassette you wish to play.
    • Press REVERSE MODE.
    • Press DOLBY NR if the cassette you want to play was recorded with Dolby noise reduction.
    • Press one of the piay buttons to start playback.
• Listening to Tapes
  • ■ To stop playback
  • Press the stop button.
  • ■ Full auto-stop
  • ■ About the Dolby Noise Reduction system
  • Listening to two tapes consecutively
    • 1 Press the TAPE input select button.
    • 2 Load cassettes in decks 1 and 2.
    • 6 Press the forward-side playback (>) button to start playback.
    • ■ To stop the tape midway Press the stop button.
    • Press DOLBY NR if the cassette you want to play was recorded with Dolby noise reduction.
    • 5 Press DECK 1/2 to select deck 1.
• Listening to Tapes
  • 7r
    • To find the beginning of a program (TPS: tape program sensor)
      • Press the fast-forward/rewind (TPS) button while the tape is playing.
    • To fast forward or rewind the tape
      • Press the fast-forward/rewInd (TPS) button while the tape is stopped.
  • C
• Making a Recording
  • To record from the radio or external source
    • ■ To briefly interrupt recording
    • Press REC PAUSE.
    • ■ To stop recording
    • Press the cassette deck stop button.
    • (continued)
    • ■ To erase a recorded tape (Deck 2)
    • ■ To use the beat proof function Press FM MODE/BP on the tuner.
  • Tape-to-tape recording from deck 1 to deck 2
• Edit-Recording from Compact Discs
  • Sequential CD recording (ALBUM)
    • Switch on the power.
    • 1 Press the CD input select button.
    • 2 Press OPEN/CLOSE on the CD piayer to ioad a disc.
    • 3 Press CD EDIT.
    • 4 Turn the jog dial to select ALBUM.
    • 5 Press SET.
    • Load a cassette In deck 2.
    • Turn the jog dial to specify the length of the tape you are using.
    • 8 Press SET.
    • 9 Press the CD play button for automatic recording.
    • ■ About Automatic Tape Level Setting (ATLS)
    • ■ To cancel album edlt-recordlng
    • Press the CD stop button twice.
• Edit-Recording from Compact Discs
  • (continued)
  • Tape length priority recording (FIT EDIT)
    • 1 Press the deck 2 eject button to load a cassette in deck 2.
    • 2 Press the CD input select button.
    • 3 Press OPEN/CLOSE on the CD player to load a disc.
    • 4 Press CD EDIT.
    • 5 Turn the jog dial to select FIT.
    • 6 Press SET.
    • 8 Press SET.
    • 7 Turn the jog dial to select the length of the tape you are using.
    • 9 Press the CD play button for automatic recording.
    • ■ To cancel tape length priority recording (fit edit-record I ng)
    • Press the CD stop button twice.
    • ■ To confirm the play sequence
    • You can confirm the play sequence on the display by pressing the skip/search button In the stop mode.
• Edit-Recording from Compact Discs
  • (continued)
  • Program edit-recording
    • 1 Follow tape length priority recording steps 1 through 4 (page 40).
    • 3 Press SET.
    • 4 Turn the Jog dial to select the length of the tape you are using.
    • 5 Press SET.
    • b Turn the Jog dial to assign the tracks in sequence.
    • 7 Press SET.
    • 8 Repeat steps 6 and 7 to complete the program.
    • 9 Press the CD play button to start recording.
    • ■ To cancel program edit*recorcling
    • Press the CD stop button twice.
    • ■ To confirm the play sequence
    • You can confirm the play sequence on the display by pressing the skip/search button in the stop mode.
  • To record another disc on the remaining blank tape
• Changing the Tone Quality
  • Using the graphic equalizer control
  • To listen with augmented bass (super bass effect)
    • Press SUPER BASS.
• Using the Timer
  • Setting timer piay
    • 12 Press VOL PRESET to set the volume level for timer play.
    • 13 Adjust the volume level using the volume level control.
    • 14 Press VOL PRESET again.
    • ;15 Press one of the Input select buttons.
• Using the Timer
  • ■ When you have made a wrong setting on steps 1 to 10 (on page 46)
  • Press CANCEL.
  • ■ To confirm timer piay
  • Press CLOCK/TIMER in the power standby mode.
  • Setting timer recording
• Using the Timer
  • ■ When you have made a wrong setting on steps 1 to 10 (on page 46)
  • Press CANCEL.
  • ■ To confirm timer recording
  • Press CLOCK/TIMER in the power standby mode.
  • A To cancel timer recording Press REC TIMER.
  • To use the sleep timer
• Using the Timer
  • ■ To use the sleep timer in conjunction with the timer play or timer recording operation
• sing an External Unit
  • To enjoy an external source
• Care & Use
  • I Concerning Cassette Tapes
    • ■ Selection of cassette tapes
    • ■ To prevent erasure of a recorded tape
    • ■ Improper tape storage
    • ■ Tape slack
  • Concerning Compact Discs
    • ■ Handling precautions
    • ■ Storage precautions
  • Maintenance
    • ■ Cassette deck head care
    • ■ Cassette deck head demagnetization
    • ■ Maintenance of external surfaces
• Guide
  • Problem
  • Probable cause(s)
  • Suggested remedy
  • While listening to FM broadcasts
• T roubleshooting Guide
  • Problem
  • Probable cause(s)
  • Suggested remedy
• irechnical Specifications
  • Amplifier section
  • ■ Speaker system
  • ■ General
  • tsushita Electric Industrial Co., Ltd.