T1/e1 port connections, Rj-21 analog voice interface – Cisco IAD2430 User Manual
Page 18
1-2
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
Chapter 1 Overview of Cisco IAD2430 Series IADs
Overview
Figure 1-1
Cisco IAD2430 Series IADs Front Panel
Figure 1-2
Cisco IAD2435 Series IADs Front Panel
The Cisco IAD2430 series IADs support the following interfaces:
•
10/100BASE-T LAN connection
•
T1/E1 port connections
•
RJ-21 analog voice interface
•
WAN interface card/voice interface card (WIC/VIC) options
•
External/internal flash memory
The Cisco IAD2430 series IADs can be mounted in a rack, on a wall, or a desktop.
Warning
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions. Statement 1015
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means by security. Statement
1017
Warning
No user-serviceable parts inside. Do not open. Statement 1073
88839
CISCO IAD2400
231872
Cisco IAD2400 SERIES
OK
0/0
0/1
FE
T1/E1
FXS
CD
AL
2/0
2/1
2/2
2/3
2/4
2/5
2/6
2/7