Cisco IAD2430 - Manual (Page 47)

3-11
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
Chapter 3 Installing Cisco IAD2430 Series IADs
Wall-Mounting the Chassis
Figure 3-10 Wall-Mounting the Chassis
Wall-Mounting the Cisco IAD2435 IADs
You can mount the router on a wall or other vertical surface by using the molded mounting brackets on
the bottom of the router and two number-six, 3/4-inch (M3.5 x 20-mm) screws. You must provide the
screws.
Figure 3-11 shows the screw holes.
1 Wall 2 Bracket
3 Wall stud 4 Keyhole for starter screw
103517
CISCO
IAD2400
3 1
2
4