Cisco IAD2430 - Manual (Page 58)

3-22
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
Chapter 3 Installing Cisco IAD2430 Series IADs
Connecting Cables
Figure 3-19 Connecting the External Power Supply to the Cisco IAD2435
Connecting the Console Port to a PC or an ASCII Terminal
To connect the console port to a PC that is running terminal emulation software, use the procedure in
this section.
Note The console port does not support hardware flow control.
Cable
Use an RJ-45-to-DB-9 console cable (see location 5 in Figure 3-17 on page 3-20 ).
Procedure
Step 1 Connect the cable between the Cisco IAD console port and the serial port on the PC or ASCII terminal.
Step 2 Configure the terminal emulation software requirements:
• 9600 baud
• 8 data bits
• 1 stop bit
• no parity
1 Power lock clip 2 Power cord
3 Power adapter 4 AC plug
IAD2435-8FX
S
12V DC S A
CONSOLE
AUX
FastEthernet
WAN
0/1 0/0
T1/E1
FXS
272268
1
2
4
3