Brookfield DV2T Viscometer - Manual (Page 43)

Brookfield Engineering Labs., Inc. Page 43 Manual No. M13-167-B0614
Sound
- Adjust the volume of the DV2T sounds and select which
sounds to silence.
Display
- Adjust the brightness, select language and restore Pop-Up
messages.
Change Password - Change the password for the Log In account used to access
the DV2T Viscometer.
TIP: Each User can set their own preferences for Sound and Display.
Sound:
The Sound menu provides adjustment of the volume for the sounds utilized by
the DV2T. Additionally, specific sounds can be toggled on/off including: Button
Click, Test End Alarm, QC Limits Alarm, Global Alarm, and Pop-Up.
TIP: Sound settings can be returned to Factory Setting through Settings Reset
found in the Admin Function Settings menu.
Display:
The Display menu provides adjustment of Screen Brightness, Language Selection,
and Pop-Up Message management. The Screen Brightness adjustment applies
to all screen views within the DV2T.
Note: The screen brightness is dimmed automatically after 5 minutes of no touch
screen activity. The brightness will be dimmed to the lowest value. A single touch
of the touch screen will return the display to the set brightness value.
The Language Setting is selected by pressing the Language field and choosing
the appropriate language from the list. The selected language will be implemented
immediately.
Pop-Up Messages can be toggled on/off through the check box (see Figure IV-
5). This check box applies to all Pop-Up Messages. Pop-Up Messages can be
toggled off individually through the check box that appears within the message
box. Once the Pop-Up is turned off, it will not be shown again. Pop-Up Messages
can be restored through the use of the Restore Hidden Pop-Ups command key
at the bottom of the Display Settings screen. This command key will restore all
Pop-Ups.
Figure IV-5