ChemoMetec NC-200 - Manual (Page 34)

991-0204 Rev. 1.1 September 2012 34
 Parameter types: The available parameters depend on the protocol used to generate the *.cm file.
Gating Setup: Launches the ‘Gate Configuration’ window, where gating settings can be configured for this
plot.
New Marker: Creates a new marker.
Selected Gate: Edit the selected marker.
 Move with Arrow Keys
 Move Left End with Arrow Keys
 Move Right End with Arrow Keys
 Copy to Clipboard
 Delete
BMP to Clipboard: Copies the large plot to the clipboard to paste the bitmap image into a preferred
program.
Cancel: Closes the large plot without saving the changes.
OK: Closes the large plot and saves the changes.
Data source indicator: A small colored square in the upper left corner of the plot area indicates the source
of the cell population (see further details in the section Row Window in Plot Manager).
Line type and colors: These may be set with the controls in the upper right corner of the plot window after
an additional histogram has been overlaid to an existing histogram.
Right click options: Right click inside the plot area when a marker is selected to get a context menu offering
the following options:
 Paste Marker
 Copy Histogram
 Paste Histogram
 Add Cells Inside Marker to Image Overlay
 Add Cells Outside Marker to Image Overlay
Depending on the actual state of the large histogram plot, some of the above options may be
dimmed or not present.
Copy Histogram and Paste Histogram options may be used to insert and overlay histograms from
other histogram plots.
Add cells inside marker to image overlay: Selecting this option will add cells inside the selected
marker to the image overlay, causing these cells to be marked with a non-filled, enclosing square.