ChemoMetec NC-200 - Manual (Page 42)

991-0204 Rev. 1.1 September 2012 42
License, Protocol and Documentation Installation
Introduction
When NucleoView® NC-200™ performs a certain analysis routine (a protocol); this is performed under
control of a protocol and documented in a protocol documentation file.
To run a given protocol, the corresponding protocol-, license- and documentation-files must have been
imported. This is normally performed when the NucleoView® NC-200™ software is installed, but it may also
be done any time later as described in the next section.
License, Protocol and Documentation Installation
Install licenses, protocols and protocol documentation as follows:
1. In the menu select File->Import Package
2. In the file selection browser pop up window, browse to and select the file you want to install.
This will typically be a zip-file containing multiple license, protocol and documentation files, or it
may be e.g. individual *.cmsx and *.pdf files.
If you at any later time want to install extra licenses and protocols, this is done using the same procedure.
The new elements will simply be added to the existing collection.
Important: Do not edit license files or protocol files manually as this will invalidate the files.
Select Help->View License File to see a list of installed licenses.
A license is typically valid for a particular NucleoCounter® NC-200™ instrument (identified by serial
number). A license may have an expiry date.