ChemoMetec NC-200 - Manual (Page 38)

991-0204 Rev. 1.1 September 2012 38
Plot Manager Gate Configuration
The table in the ‘Gate Configuration’ window is used to configure settings for polygons and marker sets for
the plot from which the gate configuration window was launched.
The table lists all gates (polygons and markers) which have been defined in the associated row. Note that
gates marked as shown will only be shown in the plot, if the conditions for this are fulfilled, i.e. markers are
only shown in histogram plots, and polygons are only shown in scatter plots. Furthermore the axis
parameters of the plot must be identical to the axis parameters for the gate.