ChemoMetec NC-200 - Manual (Page 44)

991-0204 Rev. 1.1 September 2012 44
How To
How to Get Context Sensitive Help
While having focus on a control on a specific window, press the button or F1 (not applicable on the main
window). This will start on-line help on the relevant page. Online-help will explain about each control on
that page starting in upper left corner, working right and then down towards the lower right corner.
How to Verify Correct Operation of the NucleoView® NC-200™ Instrument after Transportation
The NucleoView® NC-200™ Instrument is a very robust device which handles shipping well, provided it is
packaged correctly in the original shipping box. In case of extreme physical stress, it may however suffer
internal damage and/or misalignment.
After transportation, e.g. with aircraft or car, it is hence recommended to run the Installation Qualification
(IQ) protocol. This protocol will inspect critical internal alignment and report any changes.
The Operation Qualification protocol verifies correct operation of the instrument.